Choose your language:

France
Germany
Hong Kong

India
Ireland
Japan
Malaysia
Netherlands
New Zealand

Singapore

Sweden
United Kingdom
United States
Course Code

TO302 / TO402

Duration

5 Days

Due to the pace and duration of this course, ideal candidates for this course operate in medium to very large computing environment:
  • They have a minimum of one-year experience working in a LAN/WAN environment
  • They have a minimum of six months experience in a multi-LAN environment
  • They have passed the Network+ course and certification exam and/or possess this knowledge
  • Participants in this accelerated course should already know basic Cisco commands for both routers and switches
Participants of this accelerated course are provided knowledge and skills to install and configure Cisco IOS routers and switches in a multi-router network that uses LAN and WAN interfaces for the most commonly used routing protocols. The CCNA is considered to be the most universally rewarding certification produced in the IT industry. Individuals who possess a CCNA usually carry job titles such as Network Engineer or Network Architect.
This course is designed for all IT personnel who meet the prerequisites.
Upon completion of this course, participants will be able to:
  • Configure Cisco IOS routers and switches to support a specified list of protocols and technologies
  • Interconnect Cisco switches and routers following the specification in a network design
  • Determine in which situation a hub, Ethernet switch, or router would be used
  • Configure Cisco routers and switches to support a specific list of protocols and technologies
  • Identify each of the seven layers of the OSI reference model
  • Overview of Ethernet Networks and CSMA/CD, Half-Duplex and Full-Duplex Ethernet, and MAC Addressing
  • Understand the TCP/IP and the DoD Model, Describe classes of IP addresses, and understand IP Addressing
  • Understand subnetting basics and How to Create Subnets and Subnet Masks for Class A, B, and C IP addresses
  • Understand Variable Length Subnet Masks (VLSM) and Classless Inter-Domain Routing (CIDR)
  • Design an IP addressing scheme to meet design requirements and explain route summarization and aggregation
  • Utilize the Command Line Interface (CLI) to configure Hostnames, Banners, Descriptions, and Passwords
  • Configure router interfaces and verifying and saving your configuration
  • Understanding the IP routing process, Create and verify static route and default routing
  • Design a simple internetwork using Cisco technology
  • Configure, verify, and troubleshoot RIP routing
  • Configure, verify, and troubleshoot EIGRP
  • Configure, verify, and troubleshoot OSPF
  • Managing Configuration Register, back up and restoring the Cisco IOS and startup and running configuration
  • Configure, verify and troubleshoot IP standard, IP extended, and named access lists
  • Introduction to IP Services and recognize high availability with First Hop Redundancy Protocols (FHRP)
  • Hot Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP), and Global Load Balancing Protocol (GLBP)
  • Configure and verify Syslog and utilize Syslog Output
  • Describe SNMP v2 and v3
  • Configure, verify, and troubleshoot NAT (Static, Dynamic, and Overloading NAT)
  • Describe Layer-2 switching and Spanning-Tree Protocol
  • Configure, verify, and troubleshoot Cisco IOS Switches
  • Understand VLAN Basics and VLAN Memberships (Static and Dynamic)
  • Identifying VLANs, Frame Tagging and Inter-Switch Link (ISL)Protocol
  • Describe Virtual Trunking Protocol (VTP) and Routing between VLANS
  • Configure, verify, and troubleshoot VLANs
  • Understand IPv6 Addressing and Expressions and how IPv6 works in an Internetwork
  • Configure, verify, and troubleshoot IPv6 Address and IPv6 Routing Protocols
  • Introduction to Wide Area Networks
  • Identify and configure serial encapsulation for HDLC, PPP and Frame Relay
Day 1 – AM
Module 1: Internetworking (2 hours)

  • Identify each of the seven layers of the OSI reference model
  • Describe flow control and how it is used within an internetwork
  • List the five conversion steps of data encapsulation
Module 2: Ethernet (2 hours)
  • Ethernet Networking and cabling
  • Overview of Ethernet Networks and CSMA/CD
  • Half-Duplex and Full-Duplex Ethernet
  • MAC Addressing
  • Binary to Decimal and Hexadecimal Conversion
Day 1 – PM
Module 3: Introduction To TCP/IP (1 hour)

  • TCP/IP and the DoD Model
  • Describe the different classes of IP addresses
  • Understand IP Addressing
Module 4: Subnetting (2 hour)
  • Subnetting Basics and IP Subnet-Zero
  • How to Create Subnets and Subnet Masks
  • Classless Inter-Domain Routing (CIDR)
  • Subnetting Class A, B, and C IP addresses
Module 5: Variable Length Subnet Masks (1 hours)
  • Subnetting Basics
  • Understand Variable Length Subnet Masks (VLSM)
  • Design an IP addressing scheme to meet design requirements
  • Route summarization and aggregation
Day 2 – AM (4 hours)
Module 6: Cisco’s Internetworking Operating Systems (IOS) And Security Device Manager (SDM)

  • The IOS User Interface
  • Command-Line Interface
  • Router Configurations via the Command Line Interface (CLI)
    • Hostnames, Banners, and Descriptions
    • Setting Passwords and Encrypting your passwords
    • Configure router interfaces and verifying and saving your configuration
Day 2 – PM
Module 7: IP Routing (2 hours)

  • Understanding the IP routing process
  • Create and verify static route and default routing
  • Resolve network loops in distance-vector routing protocols
  • Configure, verify, and troubleshoot RIP routing
Module 8: EIGRP(2 hours)
  • Select an appropriate routing protocol based on user requirements
  • Design a simple internetwork using Cisco technology
  • Configure, verify, and troubleshoot EIGRP
Day 3 – AM
Module 9: OSPF (4 hours)

  • Select an appropriate routing protocol based on user requirements
  • Design a simple internetwork using Cisco technology
  • Configure, verify, and troubleshoot OSPF
Day 3 – PM
Module 10: Managing A Cisco Internetwork ( 4 hours)

  • Managing Configuration Register
  • Backing up and restoring the Cisco IOS and Cisco configuration
  • Use the Cisco Discovery Protocol (CDP) and Utilizing Telnet
  • Resolving Hostnames (Host Table and DNS)
  • Checking Network Connectivity and Troubleshooting
Day 4 – AM
Module 11: Access Control Lists (4 hours)

  • Perimeter, Firewall, and Internal Routers
  • Configure and troubleshoot IP standard access lists
  • Configure and troubleshoot IP extended access list
  • Configure and troubleshoot IP named access list
  • Monitor and verify access lists
  • Configure Access Lists Using SDM
Day 4 – PM
Module 12: Cisco’s Wireless Technologies (2 hours)

  • Introduction to Wireless Technology
  • Cisco’s Unified Wireless Solution
  • Configuring Wireless with the SDM
Module 13: Network Address Translation (2 hours)
  • Types of Network Address Translation
  • Understand how NAT works
    • Static NAT Configuration
    • Dynamic NAT Configuration
    • Overload NAT Configuration (PAT)
  • Configure, verify, and troubleshoot NAT
Day 5 – AM
Module 14: Layer 2 Switching And Spanning Tree Protocol (2 hours)

  • Describe Layer-2 switching and three switch functions at Layer 2
    • Describe address learning in layer-2 switch
    • Understand when a layer-2 switch will forward or filter a frame
    • Describe network loop problems in layer-2 switched networks
  • Describe the Spanning-Tree Protocol
  • Configure, verify, and troubleshoot Cisco IOS Switches
Module 15: Virtual LANs (2 hours)
  • Understand VLAN Basics
  • VLAN Memberships (Static and Dynamic)
  • Identifying VLANs
  • Frame Tagging
  • Inter-Switch Link (ISL)Protocol
  • Describe Virtual Trunking Protocol (VTP)
  • Routing between VLANS
  • Telephony: Configuring Voice VLANs
  • Configure, verify, and troubleshoot VLANs
Day 5 – PM (2 hours)
Module 16: Internet Protocol Version 6 (IPv6)

  • Why do we need IPv6?
  • IPv6 Addressing and Expressions
  • How IPv6 works in an Internetwork
  • Configure, verify, and troubleshoot IPv6 Address
  • Configure, verify, and troubleshoot IPv6 Routing Protocols
Day 5 – PM (2 hours)
Module 17: Wide Area Networking Protocols

  • Introduction to Wide Area Networks
  • Configure authentication with HDLC and PPP
  • Understand, configure, and monitor Frame Relay works on a large WAN network
Send Us a Message
First Name
*
Last Name
*
Company
*
Email
*
Address Line 1
*
Address Line 2
City
*
*
Zip Code
Telephone
*
*
Choose one
*
Comments